Nottingham Depot: 65 - Select Options
Integral 5 Multiport Sensor Dimmable Constant Voltage Drivers
-
Features
Integral 5 Multiport Sensor Dimmable Constant Voltage Drivers
Features
- Ideal for furniture, cabinet, display and other small applications
- Input Voltage 200-240V AC. EU plug included
- Short Circuit / Over Load / Over Heat Protection
- Plug & Play ports, easy to install, no wiring required
- Variety of sensors available to smarten up your lights
Key Features
- Available in wattage and output voltage options:
- 24W = 12V or 24V DC
- 36W = 12V or 24V DC - IP rating: IP20
- Dimming: Yes, with appropriate sensor
- Class: II
- Protection function: Short Circuit Protection, Overload Protection,
- Overheat Protection
- Power factor: 24W = 0.7, 36W = 0.9
- Input current: 24W 0.16A, 36W = 0.22A
- Output current: 24W = 2000mA, 36W = 3000mA
- Frequency range: 50/60Hz
- Input voltage: 200-240V
- Material: Plastic Shell
- Manufacturer: Integral LED
- Guarantee: 3 Years
-
Specifications & Dimensions
Specifications Brand Integral LED Dimensions Located Below Specifications Table Dimmable Yes IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Input Voltage 200-240V AC Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED lights.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Output Voltage SpecificationsLED drivers have an input and output voltage. The input voltage is usually mains voltage (230V AC) and the output voltage is usually 12V or 24V DC.
Constant voltage LED drivers are regulalry used with LED tape and have a constant, regulated voltage.
Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
1 Product Type LED Driver Sku ILDRCVA***-5 Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
24 Watt
- Length: 137mm
- Depth: 18mm
- Width: 54mm
36 Watt
- Length: 149mm
- Depth: 18mm
- Width: 56mm
-
Reviews
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
12V DC
- ILDRCVA096 - 24W
- ILDRCVA097 - 36W
24V DC
- ILDRCVA100 - 24W
- ILDRCVA101 - 36W