Warrington Depot: 600 - Select Options
Ansell Freska LED downlights are ultra slim at just 25mm in depth. They are a panel style downlight that are wider in diameter than traditional ones and have larger cut outs of 126mm 168mm or 228mm. They can be used in both commercial or domestic lighting projects. Switchable between warm white 3000K, cool white colour 4000K temperatures.
Ansell Freska LED downlights are ultra slim at just 25mm in depth. They are a panel style downlight that are wider in diameter than traditional ones and have larger cut outs of 126mm 168mm or 228mm. They can be used in both commercial or domestic lighting projects.
Also available in a surface mounted version.
- Voltage: Mains voltage supplied with an LED driver.
- Wattage: Choose between 9 watt / 12 watt / 18 watt.
- Lumen output: 554lm / 806lm / 1309lm
- Material: Aluminium trim.
- Wide diameter and cut out sizes of 126mm 168mm or 228mm.
- Beam angle: 120 degrees
- CRI: Ra80
- Colour temperature: switchable between warm white 3000K, cool white 4000K
- Finish: Matt white trim.
- Non fire rated
- IP rating: IP20
- Non dimmable
- Emergency packs available on request.
- Life expectancy: 30,000 hours
- Guarantee: 2 years
Specifications & Dimensions
Specifications Beam AngleSpecifications
Every light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
120 Degrees BrandSpecifications Ansell Lighting CRISpecifications
CRI stands for Colour Rendering Index. It is a measurement of how well a light source can render the true colour of an object compared to natural light.
Rated out of 100, with an open flame or sunlight being a perfect 100. A light with 90 CRI and above would be classed as having high CRI, while 80 CRI is the standard for LEDs.
80 Ra Cap Type Integrated LED Dimensions Located Below Specifications Table Dimmable No Downlight TypeSpecifications
Recessed downlights are available in different types such as fixed, adjustable and bathroom (IP65).
Fixed downlights shine the light directly downards. Adjustable downlights allow you to redirect the angle of light onto a specific object or area.
IP65 downlights are water resistant and suitable for use in bathroom zones 1 & 2. Most integrated LED downlights are IP65 rated as standard. This means they can be used anywhere including kitchens and living rooms etc.
Fixed GU10 downlights don't offer any resistance to water, their IP rating is usually IP20. They have no seal and cost less.
Fixed Finish Matt White Fire Rated No IP RatingSpecifications
IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Insulation CoverableSpecifications
In order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.
No Lamp ColourSpecifications Warm White Life ExpectancySpecifications 30,000 Hours Lighting Technology LED Lumens 554 Lumens Product TypeSpecifications LED Downlight Sku AFRLED***/*W VoltageSpecifications
AC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC WarrantySpecifications 2 Years WattageSpecifications
- Height: 24mm
- Diameter: 137mm
- Cut-Out Size: 116-126mm
- Height: 24mm
Cut-Out Size: 162-172mm
- Height: 24mm
- Diameter: 239mm
- Cut-Out Size: 218-228mm
Product Questions & Answers
Product Questions & AnswersDo these LED panels come with a driver?Question by: michael bird on 6 Oct 2022, 17:10Yes they do.Answer by: Chris Horridge (Admin) on 7 Oct 2022, 05:01I wish to replace my current down lights, which fit into a hole if 115mm; do you have lights that can be mounted in this dia hole ?Question by: Tony laing on 21 Apr 2023, 21:11
This downlight would be a great option:
You could use this hole converter plate:
with this downlight:
https://www.downlights.co.uk/click-nano-led-downlight.htmlAnswer by: Chris Horridge (Admin) on 22 Apr 2023, 09:15
- AFRE1/1 - 9W
- AFRE2/1 - 12W
- AFRE3/1 - 18W