Fire rated GU10 downlights from Collingwood offer an economical lighting solution that can be used with a selection of GU10 LED lamps.

Available in fixed IP20, adjustable IP20, fixed IP65 for bathrooms and in three finishes that include white, brushed steel and polished chrome. GU10 downlights operate on mains voltage and don't require any additional LED drivers or transformers. 

With push-fit wiring connectors that helps to speed up installation times.

Fire rated GU10 downlights provide users with more flexibility than integrated LED downlights as you have the option of replacing the bulb. You can order these downlights without LEDs, select one of our recommended LED from the product options, or order an alternative LED from our selection of GU10 LED lamps.

Specification

• Wattage: Max 6 watt, lamps must be ordered separately.
• Voltage: Mains voltage 230V - no additional LED driver required
• Cap / base: GU10 
• Position: Fixed, Adjustable (known as gimbal) and IP65 version available. Choose from the product options.
• IP Rating: Fixed and adjustable versions are IP20, not suitable for bathroom zones 1 and 2. IP65 version is specifically designed for use in bathroom zones 1 and 2 and can be used directly above a shower.
• Material: Die cast aluminium.
• Finish: Choose from 3 different finishes:
  Polished chrome
  Satin nickel
  Matt white
• Manufacturer: Aurora Lighting
• Guarantee: 5 Years

FAQs

Q) Can I lay insulation directly over these downlights?
A) No, these particular downlights aren't insulation coverable. If you want an insulation coverable GU10 downlight, we recommend the Aurora EFD Pro.

Q) Why are these downlights so reasonably priced?
A) We buy in bulk and pass on the savings. We've also handpicked some Philips 5W dimmable and 4.6W non dimmable GU10 LEDs that are the perfect match for a competitively downlight kit. 

Q) Which lamps are suitable?
A) As long as you select 'perfect fit' sized lamps they will fit. Perfect fit lamps are around 55mm in height and are designed as halogen replacements. Longer LEDs such as the Philips Hue won't fit as they are around 80mm in height and are too deep.

Fixed

• Height: 106mm overall height (recommended void depth:130mm)
• Diameter: 85mm diameter.
• Cut out size: 65-70mm

Adjustable

• Height: 106mm overall height (recommended void depth:145mm)
• Diameter: 85mm diameter.
• Cut out size: 79mm

IP65 Bathroom

• Height: 106mm overall height (recommended void depth:140mm)
• Diameter: 85mm diameter.
• Cut out size: 68-70mm

• Comply with Building Regulations; Part B (fire safety), Part C (moisture protection), Part E (acoustics). 
• They also comply with Part L (energy efficiency) when fitted with a suitable low energy lamp.
• Fully fire rated, they are fitted with an intumescent pad that expands in the event of a fire. This seals off the hole and prevents the spread of fire. Collingwood downlights are tested for use in 30, 60 & 90 minute ceilings.
• Tested to BS47

• Data Sheet 
• Installation Instructions
  

Fixed

• CWFRC001 - White
• CWFRC002 - Brushed Steel
• CWFRC003 - Polished Chrome

Adjustable

• CWFRC007 - White
• CWFRC008 - Brushed Steel
• CWFRC009 - Polished Chrome

IP65 Bathroom

• CWFRC004 - White
• CWFRC005 - Brushed Steel
• CWFRC006 - Polished Chrome