Fire Rated GU10 Downlights Collingwood
Sywell Depot: 2775 - Select Options
Expert HQ Rochdale: 13 - Select Options
Fire rated GU10 downlights from Collingwood offer an economical lighting solution that can be used with a selection of GU10 LED lamps.
-
Features
Fire rated GU10 downlights from Collingwood offer an economical lighting solution that can be used with a selection of GU10 LED lamps.
Available in 3 downlight types that include fixed IP20, adjustable IP20 and fixed IP65 which is suitable for bathrooms. Also available in 3 finishes that include white, brushed steel and polished chrome. GU10 downlights operate on mains voltage and don't require any additional LED drivers or transformers.
With push-fit wiring connectors that helps to speed up installation times.
Fire rated GU10 downlights provide users with more flexibility than integrated LED downlights as you have the option of replacing the bulb. You can order these downlights without LEDs, or order a GU10 LED from our selection of GU10 LED lamps.
Key Features
- Wattage: Max 6 watt lamps must be ordered separately.
- Voltage: Mains voltage 230V - no additional LED driver required
- Cap / base: GU10
- Position: Fixed Adjustable (known as gimbal) and IP65 version available. Choose from the product options.
- IP Rating: Fixed and adjustable versions are IP20 not suitable for bathroom zones 1 and 2. IP65 version is specifically designed for use in bathroom zones 1 and 2 and can be used directly above a shower.
- Material: Die cast aluminium.
- Finish: Choose from 3 different finishes:
- Polished chrome
- Satin nickel
- Matt white - Push-fit terminals
- Manufacturer: Collingwood Lighting
- Guarantee: 5 Years
FAQs
Q) Can I lay insulation directly over these downlights?
A) No these particular downlights aren't insulation coverable. If you want an insulation coverable GU10 downlight we recommend the Aurora EFD Pro.Q) Why are these downlights so reasonably priced?
A) We buy in bulk and pass on the savings. We recommend the Philips 5W dimmable or 4.6W non dimmable GU10 LEDs that are the perfect match for a truly competitively priced downlight kit.Q) Which lamps are suitable?
A) As long as you select 'perfect fit' sized lamps they will fit. Perfect fit lamps are around 55mm in height and are designed as halogen replacements. Longer LEDs such as the Philips Hue won't fit as they are around 80mm in height and are too deep. -
Specifications & Dimensions
Specifications Brand SpecificationsCollingwood Lighting Cap Type GU10 Dimensions Located Below Specifications Table Dimmable LED Not Included Downlight Type SpecificationsRecessed downlights are available in different types such as fixed, adjustable and bathroom (IP65).
Fixed downlights shine the light directly downards. Adjustable downlights allow you to redirect the angle of light onto a specific object or area.
IP65 downlights are water resistant and suitable for use in bathroom zones 1 & 2. Most integrated LED downlights are IP65 rated as standard. This means they can be used anywhere including kitchens and living rooms etc.
Fixed GU10 downlights don't offer any resistance to water, their IP rating is usually IP20. They have no seal and cost less.
Finish SpecificationsSelecting the appropriate color or finish for your lights and switches is key to creating a unified and attractive interior. Aim to match the finish of your downlights with other elements like switches and sockets. The matt white finish is especially popular for downlights as it seamlessly merges with white ceilings. More info here.
Fire Rated SpecificationsFire-rated downlights are engineered to maintain a ceiling's fire resistance, safeguarding against the spread of fire through openings needed for these recessed light fittings. More info here.
Yes IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Insulation Coverable SpecificationsIn order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.
Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.No Lighting Technology Lamp Not Included Product Type SpecificationsGU10 Downlight Series SpecificationsThe sub-brand of a manufacturer that groups collections of products together.
Collingwood Fire Rated Sku CWFRC00* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Fixed
- Height: 106mm overall height (recommended void depth:130mm)
- Diameter: 85mm diameter.
- Cut out size: 65-70mm
Adjustable
- Height: 106mm overall height(recommended void depth:145mm)
- Diameter: 85mm diameter.
- Cut out size: 79mm
IP65 Bathroom
- Height: 106mm overall height(recommended void depth:140mm)
- Diameter: 85mm diameter.
- Cut out size: 68-70mm
-
39 Reviews
-
Product Questions & Answers 2
Product Questions & Answers
Im just looking at the collingwood GU 10 IP 65 to replace existing halogen lights I have 17 that need to fill existing holes that are 90mm (10 are for a bathroom and 20 that need to fill 70mm holes for the kitchen Will this one style fit both diameters and what GU lamp should I fit?Question by: Nick Fenwick on 4 Jan 2023, 14:50I'd recommend using the below two products for each area:
https://www.downlights.co.uk/fire-rated-gu10-downlight-large-hole-integral-evofire.html
https://www.downlights.co.uk/integral-evofire-gu10-fire-rated-downlights-new.html
The Collingwood ones wouldn't fit in the bathroom.Answer by: Mathew Smith (Admin) on 4 Jan 2023, 16:55Hi. The cut-out for the fixed variant is stated to be 65-70mm. But other websites show 70mm for this product. I have 65mm cut-outs and I'm concerned that they won't actually fit. Thanks for your time.Question by: Jai on 21 Apr 2024, 12:25I've checked and the IP20 Fixed version is 65-70mm.Answer by: Mathew Smith (Admin) on 23 Apr 2024, 09:19 -
Product Codes
Fixed
- CWFRC001 - White
- CWFRC002 - Brushed Steel
- CWFRC003 - Polished Chrome
Adjustable
- CWFRC007 - White
- CWFRC008 - Brushed Steel
- CWFRC009 - Polished Chrome
IP65 Bathroom
- CWFRC004 - White
- CWFRC005 - Brushed Steel
- CWFRC006 - Polished Chrome
