Ener-J Smart Wireless Non-Dimmable Kinetic Switches, that require no wiring or batteries. Operating on kinetic energy, these switches are ideal for use in areas where a power cable can't be run.
Installers no longer need to be constrained by wiring location, the need to install back boxes or cut holes into walls as ENERJ’s Wireless switch can be installed or placed to maximise convenience. ENER-J’s wireless switch has a built-in micro energy generator, so the action of pressing the switch generates enough kinetic energy to create and transmit a radio signal. This, in turn, will switch on/off via a receiver (wireless controller) lamps or other loads.
Advantages of using ENER-J’s wireless switches include:
- Wireless - No piping or wiring required.
- Eco-friendly - No battery, no dust, no construction waste.
- Maintenance free - No need to ever change the battery.
- Water-resistance - The switch can work in wet environment (IP67).
- Long range - The reliable RF remote control extends 30m indoor and 100m outdoor.
- Memory function - Remembers previous settings.
- Flexible pairing - Create multi-location switch.
- Easy installation - Takes only 5 minutes to install, with no battery, no WiFi, no BLE, no app required.
- Durable - 50 years mechanical lifetime of the switch.
- Cost saving - Saves 30% compared to a traditional switch. Reduces manual labour and decreases construction costs by 30%.
Download the ENERJ Smart APP
- Available in gang options: 1 gang, 2 gang and 3 gang.
- Choose finish options: White or Silver
- Non-Dimmable (also available with dimmable options)
- Wireless controllers / receivers are also available:
- 5A (WS1016) and 10A (WS1017) for Non-Dimmable Switches (Order Separately)
- Work type: 86 size rocker type
- Power source: Micro energy acquisition and self-powered
- Communication model: FSK
- Work frequency: 433MHz
- Keys: 1-3
- Lifetime: 200,000 times on/off
- Control distance:
- Outdoor 160 meters
- Indoor 30 meters
- Control method: Pairing with ENER-J Wireless controller
- No Wires: Through a wireless control terminal, such as the light or motor
- No Power supply: Dose not need any power cords, batteries or whatever power source
- Energy saving: Reduce PVC tubing, wiring and cutting walls
- Eco-friendly: Reduces battery usage, renovation waste and noise, and CO2 emisson
- Save money: Reduce manual labor, decrease construction costs by 30%, Speed up progress by 40%
- Safety: Waterproof so perfect to use in bathrooms where you don’t need to worry about voltage regulations since these are volt free
- Smart: Can pair up connection, control at will, and dock with smart home system
- Durable: Wireless kinetic switches does not use batteries, creates no wear and tear, and can be used for 60 years
- Manufacturer: Ener-J
- Guarantee: 2 Years
- Length: 86mm
- Width: 86mm
- Height: 14.5mm
- WS1013 - 1 Gang
- WS1014 - 2 Gang
- WS1015 - 3 Gang
- WS1021 - 1 Gang
- WS1022 - 2 Gang