The Ansell Orbio hole converter plate allows the Orbio LED downlight to be installed into ceilings with hole sizes from 76mm to 140mm diameter. This converter plate is not recommended for use with other downlights. Ideal for use when you need to replace older downlights such as R63, R80 etc.
Specification
- Suitable for hole sizes: 76mm to 140mm.
- Diameter: 176mm
- Finish: Available in Matt white, polished chrome and satin nickel.
- The Ansell Orbio downlight must be purchased separately.
- Manufacturer: Ansell Lighting
nil
Great lights however would benefit from push fittings like the prism range of lights. I only fit ansell down lights now.
Perfect for our requirement.
- ALEDCP/MW - Matt white
- ALEDCP/CH - Polished chrome
- ALEDCP/SC - Satin chrome
Hole Converter Plate Ansell OrbioRRP: £10.85 Prices FromEx VAT £6.51 Inc VAT £7.81 40% off RRP |
Hole Converter Plates for JCC V50 FixedRRP: £14.64 Prices FromEx VAT £7.32 Inc VAT £8.78 50% off RRP |
Halers Hole Converter Plate For H2 / H4 / New H2 LiteRRP: £24.00 Prices FromEx VAT £16.80 Inc VAT £20.16 30% off RRP |
|
| Short Description |
The Aurora hole converter for use with M10DOB LED downlights. Allows the M10 to be fitted into larger holes to replace fittings such as R80 downlights or fans etc. This converter plate is not recommended for use with other downlights. |
Hole converter plates can be very useful when you are replacing over-sized downlights with new modern LED downlights. |
Hole converter plate that allows various Halers downlights to be fitted into larger ceilings holes. |
| SKU |
ALEDCP/**
|
JC1003**
|
DLCONVERT70**
|
| Dimmable |
-
|
N/A
|
N/A
|
| Voltage |
N/A
|
N/A
|
N/A
|
| Wattage |
-
|
-
|
-
|
| Beam Angle |
-
|
-
|
-
|
| Cap Type |
N/A
|
N/A
|
N/A
|
| Depth / Height |
-
|
-
|
-
|
| Manufacturer |
Ansell
|
JCC
|
Collingwood
|
| Cut Out Size (varies: check downlight dimensions) |
91-120mm
|
91-120mm
|
121-160mm
|
| Luminous Flux |
N/A
|
-
|
-
|
| Fire Rated |
N/A
|
Fire Rated
|
N/A
|