Outdoor LED Wall Light Integral Curve
Nottingham Depot: 400 - Select Options
Expert HQ Rochdale: 1 - Select Options
The Integral Curve is an outdoor LED wall light that is available with or without a PIR sensor. The passive infra-red or PIR will automatically switch the light on when some gets close and off again when nobody is near.
-
Features
The Integral Curve is an outdoor LED wall light that is available with or without a PIR sensor. The passive infra-red or PIR will automatically switch the light on when some gets close and off again when nobody is near.
The modern curved design provides a diffused downward lighting effect. With a warm white 3000K or 4000K warm white colour temperature and 360 to 420 lumen output, it offers a bright, clean light output.
Key Features
- Available in colour temperature with or without a PIR sensor options.
- 3000K Warm White = PIR or without PIR Sensor / 7.5W
- 4000K Cool White = PIR or without PIR Sensor / 7.5W/8W - Finish: Dark Grey
- Colour rendering index: 80
- Non-Dimmable
- Energy rating: A
- IP rating: IP54
- Lumens: 360lms / 420lms
- Frequency range: 50/60 Hz
- Ampage: 350mA
- Power factor: >=0.80
- Lifetime: 25,000 hours
- Voltage: 220-240V AC
- Material: Die cast aluminium
- Driver included: Yes
- Guarantee: 3 years
- Manufacturer: Integral LED
- Available in colour temperature with or without a PIR sensor options.
-
Specifications & Dimensions
Specifications Brand SpecificationsIntegral LED Cap Type Integrated LED Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table Dimmable No Finish SpecificationsSelecting the appropriate color or finish for your lights and switches is key to creating a unified and attractive interior. Aim to match the finish of your downlights with other elements like switches and sockets. The matt white finish is especially popular for downlights as it seamlessly merges with white ceilings. More info here.
Dark Grey GTiN 5055788232605 IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP54 Internal or External External Lighting Technology LED Product Type SpecificationsWall Light Sku CURVE* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Wattage Specifications7.5 W With PIR Sensor - Length: 270mm
- Width: 82mm
- Depth: 112mm
- Length: 270mm
-
5 Reviews
-
Product Questions & Answers 2
Product Questions & Answers
Does this light have adjustments for PIR sensitivity (distance) and a timerQuestion by: steve on 16 Jan 2023, 18:27I've attached an instruction sheet for the PIR version, its located in the 'Data Sheets & Brochures' dropdown.
Here are the settings for the PIR:
16. Detection Area: 90˚ horizontal beam angle with detection area within 8 metres
(based on a 1.5m mounting height).
Adjustment
17. Light sensitivity – adjust to desired setting, minimum 10 lux, maximum 100 lux.
18. Time Switch – adjust to desired setting, minimum 1 minute, maximum 10 minutesAnswer by: Chris Horridge (Admin) on 17 Jan 2023, 06:10The light has stopped working and the lense is full of water ,can this be taken apart to empty th water out.Question by: Martin on 12 Jun 2023, 12:10Water damage on electrical items will require a full dry out and then testing to see if it still works. It would depend on long the water + electricity got mixed for. Its difficult to say if the damage is permanent.Answer by: Chris Horridge (Admin) on 12 Jun 2023, 12:34 -
Product Codes
With PIR
- ILDEA009 - 3000K Warm White / 7.5W
- ILDEA029 - 4000K Cool White / 8W
Without PIR
- ILDEA008 - 3000K Warm White / 7.5W
- ILDEA028 - 4000K Cool White / 7.5W
