Fire Rated GU10 Downlight Integral EvoFire
Expert HQ Rochdale: 124 - Select Options
Nottingham Depot: 12862 - Select Options
EvoFire downlights from Integral LED are a new generation of GU10 fire rated downlights. To the untrained eye this looks like a simple downlight but it's the simplicity that makes it such an evolution.
-
Features
EvoFire downlights from Integral LED are a new generation of GU10 fire rated downlights. To the untrained eye this looks like a simple downlight but it's the simplicity that makes it such an evolution!
The open design provides optimum temperature conditions for the installed GU10 or MR16 LED increasing airflow and preventing heat from building up. This is opposed to traditional fire can downlights that cut off the air supply to the LED which significantly reduces the lifetime of the bulb.
Lamps installed in the Integral EvoFire downlights operate at up to 10 degrees C cooler than enclosed can style downlights. The patented design of EvoFire downlights provides fire protection in its own unique way. By filling the hole with the Evofire downlight it utilises its fire rated steel bezel and glass using it as a barrier. With this it is able to maintain the integrity of the fire-rated ceiling.
Rated at IP65 as standard which offers resistance to water and dust the ultra-thin, blend-in bezel of just 1mm in thickness allows the downlights to fit barely noticeably into a ceiling space. Designed specifically for use with LED lamps this includes mains voltage GU10 or low voltage MR16 with a maximum wattage of 10W. These fire rated downlights are ideal for any room in the home including lounges, kitchens and bathrooms.
GU10 LED lamps are available in a large selection of options from different brands. The advantage of using GU10 downlights over integrated is that you can choose between different wattage types, colour temperatures and between dimmable or cheaper non-dimmable versions. The EvoFire is a downlight housing and the LED provides the light.
Available in fire rated and insulation coverable or just fire rated. The insulation coverable version is fitted with an insulation cover guard that allows you to lay insulation directly on top of it. Some versions are available in singles and in multi-packs of fours and threes which offer a bulk buy saving.
Now available in round styles and in matt white, satin nickel and chrome finishes. As the non insulation coverable version has no back to it it has no height restrictions meaning you can fit deeper LED bulbs inside. Some deeper LEDs like the Philips Hue GU10 don't have a flat front and don't sit quite right within the downlight.
Key Features
- Wattage: Maximum 10 watt (LED not included) view our range of GU10 LEDs here
- Voltage: Mains 240V
- Cap type: GU10
- Position: Fixed
- IP Rating: IP65 as standard and suitable for use bathroom zones 1 and 2
- Finishes: Choose from Antique Brass, Black, Chrome, Satin Nickel and Matt White.
- Also available in square style
- Also available in a low glare version
- Dimmable when fitted with a dimmable LED GU10
- Suitable for ceiling thickness's of 3mm to 30mm
- Fire rated: Yes fully fire rated to 30, 60 and 90 minute ceilings. Fire rating certificates available from the data sheets tab
- Tested in UKAS Accredited Lab
- Part E Compliant (acoustics)
- Supplied with a push fit loop-in loop out terminal block and GU10 holder
- Manufacturer: Integral Lighting
- Guarantee: 3 years
-
Specifications & Dimensions
Specifications Brand SpecificationsIntegral LED Cap Type GU10 Dimensions Located Below Specifications Table Dimmable LED Not Included Downlight Type SpecificationsRecessed downlights are available in different types such as fixed, adjustable and bathroom (IP65).
Fixed downlights shine the light directly downards. Adjustable downlights allow you to redirect the angle of light onto a specific object or area.
IP65 downlights are water resistant and suitable for use in bathroom zones 1 & 2. Most integrated LED downlights are IP65 rated as standard. This means they can be used anywhere including kitchens and living rooms etc.
Fixed GU10 downlights don't offer any resistance to water, their IP rating is usually IP20. They have no seal and cost less.
Fixed Finish SpecificationsSelecting the appropriate color or finish for your lights and switches is key to creating a unified and attractive interior. Aim to match the finish of your downlights with other elements like switches and sockets. The matt white finish is especially popular for downlights as it seamlessly merges with white ceilings. More info here.
Fire Rated SpecificationsFire-rated downlights are engineered to maintain a ceiling's fire resistance, safeguarding against the spread of fire through openings needed for these recessed light fittings. More info here.
Yes IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP65 Insulation Coverable SpecificationsIn order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.
Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.Lighting Technology Lamp Not Included Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
Product Type SpecificationsGU10 Downlight Series SpecificationsThe sub-brand of a manufacturer that groups collections of products together.
Integral EvoFire Sku ILDLFR70D00* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Warranty Specifications3 Years Fire Rated Version
- Diameter: 85mm
- Cut out size: 70mm
- Depth: 39mm - A GU10 LED and holder will add further depth to this of up to 83mm
Fire Rated & Insulation Coverable Version
- Diameter: 85mm
- Cut out size: 70mm
- Depth: 83mm
Hole converter plates are also available for cut out sizes up to 100mm.
-
120 Reviews
-
Product Questions & Answers 6
Product Questions & Answers
Do these come with the GU10 lampholder included?Question by: Ben Archard on 10 Jun 2022, 14:56Yes they do.Answer by: Chris Horridge (Admin) on 11 Jun 2022, 06:59Is the insulation guard removable? Not sure how many of each type I will need until I start the job.Question by: Peter D on 21 Oct 2022, 09:14No, its not removable. Unless the physical size is important, the cost difference is only 89 pence.Answer by: Chris Horridge (Admin) on 21 Oct 2022, 09:24Are these Downlights dimmable with the correct bulb? Would I need to update my dimmer switch?Question by: Stephen on 7 Dec 2022, 22:39Yes, they can be dimmable if you select a dimmable GU10 LED:
https://www.downlights.co.uk/led-lamps.html?type_of_product=LED%20GU10
Yes, you'll need an LED compatible dimmer switch such as Varilight V-Pro:
https://www.downlights.co.uk/varilight-led-dimmer-switches.html
Or you can just replace the module in your existing dimmer:
https://www.downlights.co.uk/varilight-led-dimmer-modules.htmlAnswer by: Chris Horridge (Admin) on 8 Dec 2022, 07:26How do you change the bulbQuestion by: Ruth Gardner on 10 Jun 2023, 15:50You'd remove the downlight from the ceiling with the spring clips. Then twist off the GU10 bulb and insert a new one. Then insert the downlight back into the ceiling.Answer by: Chris Horridge (Admin) on 11 Jun 2023, 09:21Hi do these need a fire hatQuestion by: Howard on 10 Nov 2023, 21:05These are fire rated and require no additional fire hood.Answer by: Mathew Smith (Admin) on 11 Nov 2023, 09:10 -
Product Codes
Antique Brass Round - Fire Rated
- ILDLFR70D046 - Single Pack
Antique Brass Round - Fire Rated & Insulation Coverable
- ILDLFR70D045 - Single Pack
Matt White Round - Fire Rated
- ILDLFR70D001 - Single Pack
- ILDLFR70D001-4 - Four Pack
Matt White Round - Fire Rated & Insulation Coverable
- ILDLFR70D003 - Single Pack
- ILDLFR70D003-3 - Three Pack
Satin Nickel Round - Fire Rated
- ILDLFR70D002 - Single Pack
- ILDLFR70D002-4 - Four Pack
Satin Nickel Round - Fire Rated & Insulation Coverable
- ILDLFR70D004 - Single Pack
- ILDLFR70D004-3 - Three Pack
Copper - Fire Rated
- ILDLFR70D047 - Single Pack
Copper - Fire Rated & Insulation Coverable
- ILDLFR70D048 - Single Pack
Polished Chrome Round - Fire Rated
- ILDLFR70D017 - Single Pack
Polished Chrome Round - Fire Rated & Insulation Coverable
- ILDLFR70D018 - Single Pack
Black Round - Fire Rated
- ILDLFR70D028 - Single Pack
Black Round - Fire Rated & Insulation Coverable
- ILDLFR70D029 - Single Pack
- ILDLFR70D046 - Single Pack
