Outdoor LED Wall Light Integral Night Sign
Nottingham Depot: 100 - Select Options
Integral Night Sign LED wall light with an integrated LED light source and driver. With a bright lighting effect of up to 545 lumens it comes with a built in dusk till dawn sensor which ensures that the light won't be left on in the daytime when its not needed.
-
Features
JCC V50 tilt, colour temperature switchable LED downlight that allows you to easily switch between warm white 3000K and cool white 4000K. The JCC V50 tilt is the corresponding gimbal version of the V50 fixed which is an LED downlight that you don't have to choose which colour temperature you want until you fit it. Then if you don't like it, simply switch it to another colour temperature. With the switch located behind the front bezel, you don't have to remove the V50 from the ceiling to adjust the colour temperature.
Fitted with a small dip switch that's located on the rear of the downlight on the LED driver, it lets you switch between warm white 3000K or cool white 4000K.
Gimbal downlights allows you to change the direction of light, while fixed downlights direct the light downwards. This downlight can be tilted by 20 degrees and has a 350 degree rotatable lens.
The V50 tilt is fire rated, insulation coverable and dimmable as standard. Supplied with push-fit loop in and loop out terminals to make wiring faster and easier. Containing 2 colour temperatures in 1 downlight, you have the option of changing the colour temperature of your room whenever you like.
Key Features
- Available in bezel finish options: Brushed Nickel, Chrome and White.
- Selectable colour temperature: 3000K and 4000K.
- CRI: 80
- Wattage: 7.5W
- Beam angle: 60 degree
- Lumen: 600-650lms
- Lumens per circuit watt: 80-87 lms/W
- Triac Dimming
- Fully Fire Rated
- IP rated: IP20
- Lifetime: 50,000 hours
- Voltage: 230-240V
- Material: Mid Steel
- Manufacturer: JCC Lighting
- Guarantee: 3 years
-
Specifications & Dimensions
Specifications Brand SpecificationsIntegral LED Cap Type Integrated LED Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table Dimmable No GTiN 5055788232483 IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP54 Internal or External External Lighting Technology LED Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
1 Product Type SpecificationsWall Light Sku NIGHTSIGN* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
6 W - Length: 306mm
- Width: 230mm
- Depth: 60mm
- Length: 306mm
-
Reviews
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
- ILDEA003 - 3000K Warm White
- ILDEA024 - 4000K Cool White
- ILDEA003 - 3000K Warm White
