LED RF (radio frequency) remote control that requires an additional receiver (SR-1009FA). Can be used to control 1-8 separate receivers (zones). Modern looking touch operated remote control that has a similar look and feel as an iPod.
The image below shows an example of the remote control operating 2 receivers:
Provides many functions including colour changing, dimming, fading and strobe effects. If you only want to control 1 zone with a handheld remote check out the SR-2839 which is a more cost effective single zone solution. Compatible with RGB and RGB+WW LED strip light tapes.
- Battery powered with integrated batteries. Charged by USB cable which is supplied.
- Max wattage for the LED tape is determined by the receiver:
- - 12V supply is 180W for RGB
- 24V supply is 360W for RGB or 480W for RGB+WW
- Operating range: Up to 20 metres
- Product code: SR-2818
- Manufacturer: LED Strip Fit
- Guarantee: 2 years
The example below shows the wall controller with a remote control and smart phone with 3 receivers on the same system:
- Length: 115mm
- Width: 59mm
- Depth: 12mm