LED Strip Tape 12W/M (Priced Per 10 Metre) Integral LED
Nottingham Depot: 127 - Select Options
Higher output LED Strip Tape that has a 12W per metre energy consumption and is supplied in 10M packs. The higher lumen version produces 910 to 1000 lumens per metre. LED tape produces a bright, seamless lighting effect that is similar to a fluorescent.
-
Features
Higher output LED Strip Tape that has a 12W per metre energy consumption and is supplied in 10M packs. The higher lumen version produces 910 to 1000 lumens per metre. LED tape produces a bright, seamless lighting effect that is similar to a fluorescent.
This LED tape has SMD2835 LED chips, with 60 LEDs per metre and requires a 24V DC supply.
To offer this product at the most competitive rate, it is available in 10 metre pack quantities unlike our other LED tapes that are available by the metre. Available in a choice of warm white 3000K or daylight 6500K colour temperatures.
The self adhesive backing allows it to be stuck to most surfaces or it can be fitted into an aluminium profile rail to increase heat dissipation and to provide a more complete finish. Supplied in a 10 metre pack, you can create runs of up to 10 metres without worrying about volt drop. Or it can be cut down to create smaller runs.
Key Features
- Wattage: 12W per metre with 60 LEDs per metre.
- Colour temperatures and lumens:
- 3000K Warm white at 910 per metre
- 6500K Daylight at 1000 per metre - Voltage: 24V DC - Separate power supply required.
- LED chip type: SMD2835
- Beam angle: 115 degrees
- CRI: 80
- Dimmable with a triac dimmable LED driver.
- Fitted with 200mm of input cable with a red and black core.
- Life expectancy: 13,000 hours
- Guarantee: 3 years
- IP Ratings: IP33 - slight resistance to dust and water
- Approvals: RoHS, CE and FCC.
- Manufacturer: Integral LED Lighting
-
Specifications & Dimensions
Specifications Beam Angle SpecificationsEvery light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
115 Degrees Brand SpecificationsIntegral LED CRI SpecificationsCRI stands for Colour Rendering Index. It is a measurement of how well a light source can render the true colour of an object compared to natural light.
Rated out of 100, with an open flame or sunlight being a perfect 100. A light with 90 CRI and above would be classed as having high CRI, while 80 CRI is the standard for LEDs.
80 Ra Cap Type Integrated LED Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table Dimmable Yes GTiN 5055788229810 IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP33 Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
10 Product Type SpecificationsLED Tape Sku ILSTWHIA06*E Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
24V DC Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
12 W - Width: 10mm
- Height: 2mm
- Cut points are every 100mm
- Reel length: 10M
" -
Reviews
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
- ILSTWHIA066E - Warm white 3000K
- ILSTWHIA067E - Daylight 6500K
