Low glare downlight version of the popular EvoFire from Integral LED. The EvoFire is a new generation of GU10 fire rated downlights that are open rated and have an ultra slim bezel.
Low glare downlight version of the popular EvoFire from Integral LED. The EvoFire is a new generation of GU10 fire rated downlights that are open rated and have an ultra slim bezel. Low glare downlights have the light source positioned further back within the structure to reduce glare. They also look modern and provide something different to the standard recessed design.
The open design provides optimum temperature conditions for the installed GU10 LED lamps which improves irflow and prevents heat from building up. Traditional fire can downlights with the black cans cut off air supply which reduces the lifetime of the LED and causes it to fail.
LEDs fitted inside EvoFire downlights operate at up to 10 degrees C cooler than enclosed can style downlights. The patented design of EvoFire downlights provides fire protection in its own unique way. By filling the hole with the Evofire downlight it utilises its own steel bezel and glass to create a barrier between the ceiling void and any potential fire outbreak. This effective design allows it to maintain the integrity of the fire-rated ceiling.
Rated at IP65 as standard which offers resistance to water and dust the ultra-thin, blend-in bezel of just 1mm in thickness allows the downlights to fit barely noticeably into a ceiling space. Designed specifically for use with LED lamps this includes mains voltage GU10 or low voltage MR16 with a maximum wattage of 10W. These low glare, fire rated downlights are ideal for any application including lounges, kitchens and bathrooms.
Fire rated and available with or without an insulation cover guard. The insulation coverable version allows you to lay insulation directly on top of them, helping to keep your room nice and cosy.
- Wattage: Maximum 10 watt (LED not included) view our range of GU10 LEDs here
- Voltage: Mains 240V
- Cap type: GU10
- Position: Fixed with low glare design
- IP Rating: IP65 as standard and suitable for use bathroom zones 1 and 2
- Finish: Matt White and satin nickel
- Also available in a low glare version
- Dimmable when fitted with a dimmable LED GU10
- Suitable for ceiling thickness's of 3mm to 30mm
- Fire rated: Yes fully fire rated to 30, 60 and 90 minute ceilings. Fire rating certificates available from the data sheets tab
- Tested in UKAS Accredited Lab
- Part E Compliant (acoustics)
- Supplied with a push fit loop-in loop out terminal block and GU10 holder
- Manufacturer: Integral Lighting
- Guarantee: 3 years
Specifications Cap Type GU10 Cut Out Size RangeSpecifications
We cater for a wide range of cut out sizes from the infinitesimally tiny to the big ginormous.
If you're replacing existing downlights, its best to measure the existing hole sizes and ensure your new downlights will fit.
We also stock hole converter plates for oversized holes.
61-75 mm Dimmable LED Not Included Finish Fire Rated Yes IP RatingSpecifications
IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP65 Insulation CoverableSpecifications
In order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.
Manufacturer Integral LED Product Type GU10 Downlight Sku ILDLFR70E00* Voltage 230V AC Warranty 3 Years
Fire Rated Version
- Diameter: 85mm
- Cut out size: 70mm
- Depth: 39mm - A GU10 LED and holder will add further depth to this of up to 83mm
Fire Rated & Insulation Coverable Version
- Diameter: 85mm
- Cut out size: 70mm
- Depth: 109mm
- ILDLFR70E001 - White
- ILDLFR70E002 - Satin nickel
- ILDLFR70E003 - White with insulation cover guard
- ILDLFR70E004 - Satin with insulation cover guard