Mains Voltage LED Marker Light IP67 Stainless Steel Aurora Enlite
A small LED marker light with a 42mm overall diameter that operates on mains voltage. Unlike other LED marker lights the M-Lite from the Aurora Enlite range has an integrated LED driver and LED light source. As it requires no additional items it is easy to order and even easier to install.
A small mains voltage LED marker light with a 42mm overall diameter. Unlike other LED marker lights the M-Lite from the Aurora Enlite range has an integrated LED driver and LED light source. As it requires no additional items, it is easy to order and even easier to install!
The low energy 1W LED produces 63 lumens which offers a subtle background lighting effect. Rated at IP67 it is fully water and dust resistant and can be used outdoors or indoors. Outdoor applications include patios decking, pathways or paving stones. Indoor applications include plinths, low level lighting and general bathroom ground lighting. Available in warm white, cool white or blue colour types.
- Wattage: 1 x 1W
- Input Voltage: 100-240V AC
- Beam Angle: 25 degree
- Finish: Stainless Steel
- IP Rating: IP67
- Power Factor: 0.46
- Lifetime: 30,000 hours
- Colour temperatures & Lumens:
Warm white 3000K - 63 lumens
Cool white 4000K - 66 lumens
Blue - 17 lumens
- Colour rendering index CRI: 80
- Surge Protection: 1.5 kV
- No. of LEDs: 1
- Non Dimmable
- Supplied with an installation tube
- 0.6M of input cable
- Positional Adjustment: Fixed
- Lamp Included: Yes
- Material: Aluminium / Stainless Steel grade 304 not suitable for coastal environments
- Pre-wired with 600mm of cable
- Manufacturer: Aurora Enlite / M-Lite
- Guarantee: 3 Years
Specifications Beam AngleSpecifications
Every light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
25 Degrees Brand Aurora Lighting CRI 80 Ra Cap Type Integrated LED Colour TemperatureSpecifications
Colour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimmable No Finish Stainless Steel GTiN 5056102008142 IP RatingSpecifications
IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP67 Life Expectancy 30,000 Hours Product Type LED Marker Light Sku EN-ML1/** Voltage 230V AC Warranty 3 Years Wattage 1 W
- Height: 100mm
- Recess Depth: 100mm
- Overall Diameter: 42mm
- Cutout Diameter Min: 35mm to 42mm max.
- Height: 100mm
- EN-ML1/30 - Warm white
- EN-ML1/40 - Cool white
- EN-ML1/BLU - Blue
- EN-ML1/30 - Warm white