Receiver For Single or Multi Zone Control RF

Receiver For Single or Multi Zone Control RF CV

Product-code: SR-1009FA


Quick Overview

RF (radio frequency) operated receiver that allows LED strip tapes to be controlled with a separate handheld remote controller, wall controller or smart phone.

78 in stock

Ships today if ordered in the next 12 hours and 18 minutes!

Regular Price: £52.08

Special Price: Excl. Tax: £34.72 Incl. Tax: £41.66

33% off RRP

Add to Compare

RF (radio frequency) operated receiver that allows LED strip tapes and other constant voltage LED lights to be controlled by one of our handheld remote controllers, wall controllers, a smart phone or a combination of all of them. The key selling feature of this product is that you can control multiple runs (known as zones) of LED lighting from just one controller. If you only want to control 1 zone with a handheld remote check out the SR-2839.

By assigning a receiver to a number on the controller you can control each receiver either individually or multiple receivers simultaneously. This system can also work with constant current devices such as LED ground lights but a different receiver is required (available on request).

This systems provides endless possibilities, you can set some receivers to masters and some to slaves. One receiver will power up to 360 watts of RGB colour changing LED strip tape. For longer runs you can either add a power repeater or an additional receiver and set it to a slave.

The controllers must be ordered separately. You can even have a handheld controller, wall controller and smart phone all controlling the same circuit!

To view the handheld controller (SR-2818) click on the image below:

Wall controllers require a mains voltage supply but operate the receiver(s) wire free in the same way that the remote control does. To view the wall controller (SR-2820AC) click on the image below:

These receivers are compatible with RGB and RGB+WW LED tape. You can also use them with single colour LED strips using another remote control (SR-2819SDIM) or by using the Wi-Fi hub:


  • Max wattage:
    - 12V supply is 180W for RGB
    - 24V supply is 360W for RGB or 480W for RGB+WW
  • Input voltage: Optional 12-36V DC
  • Manufacturer: LED Strip Fit
  • Guarantee: 2 years

Here's an example showing all 3 controllers on the same circuit with 3 receivers:

Here's a wiring example which is featured in the instructions:

Need further help?

Just contact us with the lengths of your LED tape runs and we'll send you a quotation including all the components you'll need, email to: [email protected] or 01706 868343.

  • Length: 179mm
  • Width: 47mm
  • Depth: 20mm

Copyright © 2020 Downlights.

 -   +