Side emitting LED strip tape from Integral LED that is supplied in 5 metre packs. By emitting the light from the side you can mount the LED on an edge and it will distribute the light towards you.
Side emitting LED strip tape from Integral LED that is supplied in 5 metre packs. By emitting the light from the side you can mount the LED on an edge and it will distribute the light towards you. Opening up more design choices than conventional LED tapes.
Available in 3000K and 4000K colour temperatures, it is self adhesive and has short cut points at every 31mm.
- Available in colour temperature: 3000K warm white and 4000K cool white.
- Voltage: 12V DC additional LED driver required.
- Lumens: 540lms per meter
- Wattage: 7W per meter (35W per pack)
- Beam Angle: 115 degree
- Colour rendering index: 80
- Dimming: Dimmable with a dimmable LED driver and dimmer switch.
- IP rating: IP20
- Strip cut points: 31mm
- Lifetime: 25,000 hours
- Manufacturer: Integral LED
- Guarantee: 3 years
Specifications Beam AngleSpecifications
Every light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
115 Degrees Colour TemperatureSpecifications
Colour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimmable Dimmable IP RatingSpecifications
IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Manufacturer Integral LED Product Type LED Tape Sku ILSTWHIA07SIDE Voltage 230V AC Wattage 39 W
- Length: 5 meters
- Cut points every: 31mm
- Width: 8mm
- ILSTWHIA076E - 2700K
- ILSTWHIA077E - 4000K