Spotless LED Strip Tape 18W/M (Priced Per 5 Metre Pack) Integral LED
Nottingham Depot: 200 - Select Options
With an energy consumption of 18 watts per metre and 300 smaller LEDs per metre the Integral spotless LED tape reduces dotting effects and offers a more seamless performance.
-
Features
With an energy consumption of 18 watts per metre (90W per pack) and 300 smaller LEDs per metre, the Integral spotless LED tape reduces dotting effects and offers a more seamless performance. With a bright light output of up to 1550 lumens it produces a captivating lighting effect.
To get the best spotless lighting effects possible we recommend installing it inside an LED extrusion profile which will further diffuse the light and also provide a more professional looking installation. Available in extra warm white 2700K and cool white 4000K colour temperatures, it has a high CRI rating of CRI90 as standard. This helps to reproduce colours as they should be under normal daylight conditions.
It is priced and supplied in 5 metre packs and has short cut points of just 20mm. We can offer a cutting and soldering service on request.
Key Features- Colour temperatures and Lumens:
- 2700K extra warm white / 1420lms per meter
- 4000K cool white / 1550lms per meter - Wattage: 18W per meter
- Voltage: 24V DC - requires an additional LED driver
- Beam Angle: 115 degree
- Colour rendering index: 90
- LEDs per metre: 300
- Dimming: Dimmable with dimmable drivers and compatible dimmers.
- IP rating: IP20
- Strip cut points: 20mm
- LED chip type: SMD2016
- Lifetime: 25,000 hours
- Manufacturer: Integral LED
- Guarantee: 3 years
- Colour temperatures and Lumens:
-
Specifications & Dimensions
Specifications Beam Angle SpecificationsEvery light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
115 Degrees Brand SpecificationsIntegral LED Cap Type Integrated LED Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table Dimmable Yes GTiN 5055788235118 IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Pack Rate SpecificationsMake a saving with our pack rate offers.
LED strips can be supplied in whichever lengths you want. If you order the 1M rate x 3, we will supply it as 1x 3M length. Or leave a comment in the checkout with your requirements and we'll supply the strips to your requirements.
Or contact us with your requirements at [email protected] and we'll send you a quotation.
5 Product Type SpecificationsLED Tape Sku ILSTWHIA07*E Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
24V DC Wattage Specifications90 W - Length: 5 meters
- Width: 10mm
- Cut points: 20mm
-
1 Review
-
Ask a Product Question
Ask a Product Question
-
Product Codes
- ILSTWHIA071E - 2700K
- ILSTWHIA072E - 4000K
