Constant Voltage LED Drivers 15W
Expert HQ Rochdale: 15 - Select Options
Constant voltage LED drivers that are compact in size and rated at 15 watts. Available in 12V or 24V DC outputs, they are non dimmable and can be used with short runs of LED strip tape and other constant voltage LED lights.
-
Features
Constant voltage LED drivers that are compact in size and rated at 15 watts. Available in 12V or 24V DC outputs, they are non dimmable and can be used with short runs of LED strip tape and other constant voltage LED lights.
Fitted with mounting holes that allow you to easily mount them directly onto surfaces such as kitchen cabinets. With built-in terminals that makes wiring easier as you don't need additional connectors.
Key Features
- Available in output voltage options:
- 12V
- 24V - Low Profile LED driver
- Protections: Short circuit/ Overload
- Compact and light-weight plastic case
- Wattage: 15W
- IP rating: IP20
- Working temperature: -20~+45 degree C (Refer to derating curve), +85 degree C (max case temp.)
- Output current: 12V = 0-1.25A / 24V = 0-0.62A
- Input frequency: 50-60Hz
- Input voltage: 180-264V AC
- Manufacturer: Ecopac
- Guarantee: 3 years
- Available in output voltage options:
-
Specifications & Dimensions
Specifications Brand SpecificationsEcopac Power Dimensions Located Below Specifications Table Dimmable No IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP20 Input Voltage Specifications230V AC Operation Mode SpecificationsConstant voltage LED drivers have a 12V or 24V DC output voltage. They are mainly used to power LED tape and smaller LED lights.
Constant current LED drivers have a 350mA or 700mA output. They are used to power more specialised LED fittings that require a precise current.
Many other output voltages and currents are avaialble but these are the most popular examples.
Constant Voltage Output Voltage SpecificationsLED drivers have an input and output voltage. The input voltage is usually mains voltage (230V AC) and the output voltage is usually 12V or 24V DC.
Constant voltage LED drivers are regulalry used with LED tape and have a constant, regulated voltage.
Product Type SpecificationsLED Driver Sku ECP15-**VF-1 Warranty SpecificationsThe minimum guarantee period of this product.
3 Years Wattage SpecificationsWattage is the unit used to measure the rate of energy transfer or power consumption in an electrical circuit or device.
15 W - Length: 103mm
- Width: 35.5mm
- Height: 16mm
-
1 Review
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
- ECP15-12VL-1 - 12V Output Voltage
- ECP15-24VL-1 - 24V Output Voltage