Coupling cables for use with LED strip tapes. Suitable for use with single colour and RGB LED tape. Used to connect one LED tape to another or can be used as bends or input cables by cutting off one end.
Available in a choice of 5 lengths ranging from 100mm to 2000mm.
Specification
- 5 lengths to choose from
- With 4 female sockets at each end
- Supplied with 2 male to male pins
- Brand: LED Strip Fit
Used led tape to illuminate display cabinet at the sides and used link cable to join the two strips across the top. Although it wasn't made clear that I would need some Male fittings to solder on to the ends of the led tape, so cut the plugs off and soldered straight on to the led tape.
Coupling Cables for LED TapeRRP: £1.14 Prices FromEx VAT £0.97 Inc VAT £1.16 15% off RRP |
Mains Input Cable for Aurora Enlite LinkE Striplights
Prices From
Ex VAT
£2.45
Inc VAT
£2.94
|
Philips Pentura Link Cable
Prices From
Ex VAT
£6.69
Inc VAT
£8.03
|
|
| Short Description |
Coupling cables for use with LED strip tapes. Suitable for use with single colour and RGB LED tape. Used to connect one LED tape to another or can be used as bends or input cables by cutting off one end. |
Mains input cable for use with Aurora Enlite LinkE LED striplights. At 2 metres in length, this cable provides an input connection from the mains to the striplight.
|
Link cable for use with Philips Pentura under cabinet lights.
|
| SKU |
LEDSTCOUP**
|
EN-T5ML20
|
910503910166
|
| Dimmable |
-
|
N/A
|
No
|
| Voltage |
12-24V DC
|
N/A
|
230V AC
|
| Wattage |
-
|
No
|
No
|
| Beam Angle |
-
|
No
|
No
|
| Cap Type |
-
|
N/A
|
No
|
| Cut Out Size (varies: check downlight dimensions) |
-
|
No
|
No
|
| Depth / Height |
N/A
|
N/A
|
N/A
|
| Manufacturer |
LED Strip Fit
|
Aurora
|
Philips
|
| Luminous Flux |
-
|
No
|
No
|
| Fire Rated |
N/A
|
N/A
|
N/A
|