Dimmable MR11 GU10 LED 3.6W = 40W 230V Integral
Nottingham Depot: 200 - Select Options
Expert HQ Rochdale: 45 - Select Options
A dimmable MR11 GU10 LED from Integral that is suitable for use with MR11 downlights such as the Evo series. The smaller 35mm diameter offers a more minimal lighting option than the more popular MR16 GU10 which is 51mm.
-
Features
A dimmable MR11 GU10 LED from Integral that is suitable for use with MR11 downlights such as the Evo series. The smaller 35mm diameter offers a more minimal lighting option than the more popular MR16 GU10 which is 51mm.
MR11 GU10 lamps operate on mains voltage and be used to replace existing low voltage MR11 lamps. Available in 2700K and 4000K colour temperatures. With a respectable light output of 290-300 lumens it offers a comparable light output to a 40 watt halogen while consuming only 3.6 watts.
If you're converting from low voltage to mains, you'll need a GU10 lamp holder to convert your fitting. The MR11 GU10 operates directly from mains, so you'll then need to disconnect and bi-pass the low voltage transformer.
Key Features
- Wattage: 3.6 watt
- Colour temperature and Lumens:
- Extra warm white 2700K / 290 lumens
- Cool white 4000K / 300 lumens - Colour rendering index: 80
- Cap type: MR11 / GU10
- Beam angle: 36 degree
- Dimmable: Yes
- IP rating: IP20
- Finish: Matt white
- Lifetime: 15,000 hours
- Driver included: Yes
- Amperage: 20mA
- Frequency range: 50/60 Hz
- Power factor: >=0.70
- Voltage: 220-240V AC
- Material: Plastic
- Manufacturer: Integral LED
- Guarantee: 2 years
-
Specifications & Dimensions
Specifications Beam Angle SpecificationsEvery light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
36 Degrees Brand SpecificationsIntegral LED CRI SpecificationsCRI stands for Colour Rendering Index. It is a measurement of how well a light source can render the true colour of an object compared to natural light.
Rated out of 100, with an open flame or sunlight being a perfect 100. A light with 90 CRI and above would be classed as having high CRI, while 80 CRI is the standard for LEDs.
80 Ra Cap Type MR11 (GU10) Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table Dimmable Yes Energy Rating F Finish Matt White GTiN 5055788237129 Incandescent Equivalent Specifications40 W Life Expectancy Specifications15,000 Hours Lighting Technology LED Lumens 300 Lumens Product Type SpecificationsLED MR11 Sku ILMR11D*01* Voltage SpecificationsAC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
230V AC Warranty Specifications2 Years Wattage Specifications3.6 W - Length: 48mm
- Width: 35mm
-
2 Reviews
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
- ILMR11DC011 - Extra Warm White 2700K
- ILMR11DE012 - Cool White 4000K
