Sywell Depot: 771 - Select Options
Collingwood GL019 Antique Brass Low Voltage Ground Lights
-
Features
Collingwood GL019 Antique Brass Low Voltage Ground Lights
Features
- Coastal protected
- Low voltage groundlight
- Compact yet powerful fitting
- Shallow depth for easy installation
- Robust cable for outdoor use
Key Features
- Available in Colour temperature and beam angle options:
- 2700K = 12 Degree or 38 Degree
- 3000K = 12 Degree or 38 Degree - Wattage: 1W at 350mA or 2W at 700mA
- Lumens: 80lms at 350mA or 130lms at 700mA (2700K), 90lms at 350mA or 150lms at 700mA (3000K)
- IP rating: IP68
- LED lifetime L70: 70,000 hours
- CRI: 80 Ra
- Material: Stainless steel (316)
- Cable/Flying lead: 1M (H05RN-F) rubberised cable (outside diameter: 6mm)
- Electric class: 3
- Manufacturer: Collingwood Lighting
-
Specifications & Dimensions
Specifications Beam Angle SpecificationsEvery light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
Brand Collingwood Lighting CRI SpecificationsCRI stands for Colour Rendering Index. It is a measurement of how well a light source can render the true colour of an object compared to natural light.
Rated out of 100, with an open flame or sunlight being a perfect 100. A light with 90 CRI and above would be classed as having high CRI, while 80 CRI is the standard for LEDs.
80 Ra Cap Type Integrated LED Colour Temperature SpecificationsColour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Dimensions Located Below Specifications Table IP Rating SpecificationsIP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.
Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.
An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.
An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP68 Input Type SpecificationsSome LED light fittings require an additional LED driver. This can be identified when the input type is anything other than Mains Voltage 230V AC.
Small LED light fittings usually operate on lower voltages as they're safer to run and you can use one LED driver to power multiple lights.
If the input type is 12V or 24V DC, a constant voltage LED driver is required. These are wired in parallel.
If the input type is 350mA or 700mA, a constant current LED driver is required. These are wired in series. It can be easier to wire LED ground lights in series as the power flows in one direction and doesn't need to loop back around.
350mA LED Drivers SpecificationsRecommended product codes for the suitable LED driver for this fitting.
PLU/350 1-9, PLR/350 1-5, PLD UNI-DRIVE 350MA, PSIP3509W Life Expectancy 70,000 Hours Lighting Technology LED Material Stainless Steel Product Type Ground Light Sku GL019A*BX** - Overall diameter: 40mm
- Depth: 41mm
- Cut-out: 33mm
-
Reviews
-
Product Questions & Answers
Product Questions & Answers
-
Product Codes
Extra Warm White 2700K
- GL019ANBX27 - 12 Degre Beam Angle
- GL019AWBX27 - 38 Degre Beam Angle
Warm White 3000K
- GL019ANBX30 - 12 Degre Beam Angle
- GL019AWBX30 - 38 Degre Beam Angle