Customisable LED Strip Tape 15W/Metre

100% of 100
More Available In Usually 3-4 weeks
Availability: %1 in stock
As low as Incl. VAT
Per Each

Customisable LED Strip Tape - Now you can easily order customised LED strip tape with a specially soldered 1 metre input cable.

  • Features

    Customisable LED Strip Tape - Now you can easily order customised LED strip tape with a specially soldered 1 metre input cable.

    Simply select your desired colour temperature, IP rating and the length of LED tape you need. If you want a length that isn't listed such as a 2.5M length, order a 3M length and snip off the end. We do offer a fully bespoke soldering service, but ordering this way is fast and efficient.

    If you want a longer input cable, it can be extended with some separate cable available here. Then connected with basic strip connectors, 162 Series wiring connectors, or Wago miniature wiring connector.

    This is our premium rated COB (Chip on Board) LED strip tape that offers a seamless, dot-free illumination. With its 480 LEDs per metre and 15 watt energy consumption it delivers unrivalled lighting results.

    Please contact us for any further information and for any other special order requests such as output connections, aluminium profile rails or technical advice: [email protected].

    Key Features

    • Available in colour temperature options:
      Extra warm white 2700K
      Warm white 3000K
      Cool white 4000K
    • Wattage: 15W per metre
    • Lumens:
      2700K = 1650 lumens
      3000K = 1750 lumens
      4000K = 2000 lumens
    • LEDs per metre: 480 LEDs per metre
    • Highly energy efficient at 133 lumens per watt
    • Priced per length
    • High CRI: 90 (Reproduces colours more effectively than other tapes)
    • IP rating: IP20 or IP65 water and dust resistant
    • Beam angle: 140 degree
    • SMD type: COB (Chip on Board)
    • Voltage: 24V DC
    • Approvals: RoHS, CE and FCC
    • Brand: LED Strip Fit
    • Life expectancy: 50,000 hours
    • Guarantee: 3 years

    General Q&A

    Can I cut and reconnect LED tape myself?

    This particular LED tape has cut points at every 50mm intervals. If you cut a section off and want to connect it to a power source, you'll need to add an input cable to it. This can be done by soldering or with a solder-free connector such as these:

    1. Solder-free input connector with 200mm of cable (adds a new input connection)
    2. Solder-free strip to strip connector (connects 2 strips directly together)
    3. Solder-free interconnection cable with 200mm of cable (ideal for corners & bends)


    Do I need a transformer?

    Yes, this LED tape requires a 24V DC supply, an LED driver is the more accurate name for a transformer or power supply. The LED driver converts mains AC (Alternating Current) voltage into DC (Direct Current) voltage. The size of the LED driver is dependant on the total length or lengths of LED tape you're powering from it.

    The selection table below shows recommendations for dimmable and non dimmable LED drivers.

    1M 15W ECP15-24VF-1 ELED-15-24T
    2M 30W LPV-60-24 ELED-30P-24T
    3M 45W LPV-60-24 ELED-60P-24T
    5M 75W LPV-100-24 ELED-90P-24T
    10M 150W HLG-150H-24A ELED-150P-24T 

    Is one big LED driver better or multiple smaller ones?

    For projects like kitchen under cabinet lighting where you'll most likely have multiple sections for each cabinet, its usually better to have smaller LED drivers which are closely located next to each strip. This can avoid having to run additional cables around obstacles like cooker hoods etc. But it does depend on the layout of your room.

  • Specifications & Dimensions
    Beam Angle
    140 Degrees
    Brand LED Strip Fit
    90 Ra
    Cable Cores 2
    Cap Type Integrated LED
    Colour Temperature
    Cut Points 50 mm
    Dimensions Located Below Specifications Table
    Dimmable Yes
    IP Rating
    LED Chip Type COB
    LED Specification
    480 LED 15W/M IP20 24V
    LEDs Per Metre 480 LEDs (15W/M)
    Length of Tape
    Life Expectancy 50,000 Hours
    Lumens 1650 Lumens
    Product Type LED Tape
    Voltage 24V DC
    Warranty 3 Years
    Wattage 15 W
    • Width: 10mm
    • Length: Order per metre section
    • Standard reel length: 10 metres (which we can cut)
    • IP20 version can be supplied in a 30 metre reel for installers
    • Cut points: Every 50mm
  • Reviews
  • Q & A

    Q & A

    No questions yet. Be the first to ask the question!
  • Product Codes

    IP20 Rated (no resistance to water)

    • LEDSTCOB15EW - 2700K
    • LEDSTCOB15WW - 3000K
    • LEDSTCOB15CW - 4000K

    IP65 Rated (water & dust resistant)

    • LEDSTCOB15EW(IP65) - 2700K
    • LEDSTCOB15WW(IP65) - 3000K
    • LEDSTCOB15CW(IP65) - 4000K