Spryte LED downlights from the Aurora Enlite range offer brightness and reliability at an affordable price. The Spryte range is set to take the downlighting industry by storm as they are one of the most cost effective products on the market!
Spryte LED downlights from the Aurora Enlite range offer brightness and reliability at an affordable price. The Spryte range is set to take the downlighting industry by storm as they are one of the most cost effective products on the market! The only downside to this range is that they're not fire rated but if you're using them commercially they don't always need to be.
Available in 3 styles which include the following:
- 8 watt fixed with a lumen output of 550-570 lumens.
- 8 watt adjustable with a lumen output of 550-570 lumens.
- 10 watt fixed with a lumen output of 830-850 lumens. This version comes with both a round and a square bezel.
With a nice wide 60 degree beam angle Spryte downlights produce a high lumen output and spread the light out further. This combination allows for fewer downlights to be installed which can further help to reduce costs.
The compact design of these downlights of 53mm requires a recess depth of only 60mm for the 8 watt versions which allows them to be fitted into shallow ceiling voids. Containing Aurora's Enfiniti lens which offers an edge to edge light output and reduces glare. The ThermoTec technology allows brighter more efficient LED chips to be installed without risking overheating as they are protected by an aluminium heat sink and thermoplastic materials. This combination dissipates heat faster away from the LED chip and results in a longer lasting more reliable product.
Spryte LED downlights can be used commercially or in homes. With their higher lumen outputs they can be used to replace halogen R63 or R80 downlights.
- Voltage: Mains 220- 240V supplied with an LED driver
- Cap / base: Integrated non replaceable LED
- Available in warm white 3000K and cool white 4000K colour temperatures
- Wattage and Lumens (brightness):
- 8 watt 3000K 550 lms / 4000K 570 lms - Suitable for 50 watt replacements.
- 10 watt 3000K 830 lms / 4000K 850 lms - Suitable for 100 watt replacements
- Beam angle: 60 degree wide beam
- Position: Fixed or adjustable in 8 watt. Fixed in 10 watt
- 10 watt version is supplied with a round and a square bezel
- IP Ratings:
- CRI: 80RA high colour rendering capabilities
- Dimmable optional
- Material: Polycarbonate
- Non fire rated. Fire hoods can be added to provide fire protection if required
- Finish: White
- Pre-wired with 500mm of 2 core cable
- Life expectancy: 25,000 hours (L70)
- Manufacturer: Aurora Lighting
- Guarantee: 3 Years
Specifications Beam AngleSpecifications
Every light source from an LED to a simple wax candle has a beam angle. A beam angle is a measurement of how the light is distributed. GU10 LEDs and recessed downlights have a fairly narrow beam of around 40 degrees, anything within 5 degrees is classed as a medium beam.
A wax candle or traditional light bulb would have a beam angle of 360 degrees as the light shines all the way around but is less intense.
Combing brighter downlights with wider 60 degree beams allows you to space them out further, reducing the total amount of lights needed.
More information about beam angles.
60 Degrees Brand Aurora Lighting CRI 80 Ra Cap Type Integrated LED Colour TemperatureSpecifications
Colour temperature is a measurement of appearance. Measured in Kelvins, the lower the rating, the warmer the light appears. Choosing the right temperature can have a dramatic effect on a room.
2700K - Extra Warm White
Similar to a traditional incandescent light bulb or halogen. It has a more orange and warmer tone, with a ‘soft white’ appearance. Ideal for living rooms.
3000K - Warm White
Clearer, but still quite warm. This is the ‘new norm’ for general lighting and is the most popular option. If you’re unsure I’d recommend trying this one.
4000K - Cool White
Clearer, whiter and crisp; used in commercial locations including supermarkets. Cool white appears brighter than warm white as the LED is covered in less phosphor. It can make a room appear cold and clinical but used correctly (white walls etc) it can make a room appear cleaner and modern.
More information about colour temperatures.
Cut Out Size RangeSpecifications
We cater for a wide range of cut out sizes from the infinitesimally tiny to the big ginormous.
If you're replacing existing downlights, its best to measure the existing hole sizes and ensure your new downlights will fit.
We also stock hole converter plates for oversized holes.
36-60 mm Dimmable Downlight TypeSpecifications
Recessed downlights are available in different types such as fixed, adjustable and bathroom (IP65).
Fixed downlights shine the light directly downards. Adjustable downlights allow you to redirect the angle of light onto a specific object or area.
IP65 downlights are water resistant and suitable for use in bathroom zones 1 & 2. Most integrated LED downlights are IP65 rated as standard. This means they can be used anywhere including kitchens and living rooms etc.
Fixed GU10 downlights don't offer any resistance to water, their IP rating is usually IP20. They have no seal and cost less.
Fixed Finish White Fire Rated No IP RatingSpecifications
IP (International or Ingress Protection) defines a products level of resistance to dust and moisture. The first digit is for dust and the second digit is for moisture.Anything higher than IP44 can be used in bathroom zones 1 and 2. IP44 is splash proof and resistance to particles larger than 1mm.An IP65 rating offers a higher resistance to moisture and is generally used outdoors. IP65 is usually specified for bathroom downlights but according to the Building Regulations, IP44 provides adequate protection.An IP68 rating is fully water resistant and can be submersed in water, up to 1M in depth.
IP44 Insulation CoverableSpecifications
In order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.
No Life Expectancy 25,000 Hours Product Type LED Downlight Sku SPRYTE Voltage 230V AC Warranty 3 Years Wattage 8 W
8 Watt Fixed
- Height: 53mm / Recess depth required: 60mm
- Diameter: 78mm
- Cut out size: 60mm
8 Watt Adjustable
- Height: 53mm / Recess depth required: 60mm
- Diameter: 90mm
- Cut out size: 66mm
- Height: 60mm / Recess depth required: 65mm
- Diameter: 105mm
- Cut out size: 82mm
8 Watt Fixed Non Dimmable
- EN-DL10160/30 - 3000K
- EN-DL10160/40 - 4000K
8 Watt Fixed Dimmable
- EN-DDL10160/30 - 3000K
- EN-DDL10160/40 - 4000K
8 Watt Adjustable Dimmable
- EN-DDL10260/30 - 3000K
- EN-DDL10260/40 - 4000K
10 Watt Fixed Dimmable
- EN-DDL1019/30 - 3000K
- EN-DDL1019/40 - 4000K