Hand held remote control for use with colour temperature adjustable LED tape (known CCT LED Tape). This remote requires an additional RF receiver and is is capable of controlling 1 to 6 zones.
This means it cane be used to control 1 run of LED tape for a basic installation or up to 6. If you want to control more than 1 zone you'll need a receiver for each zone. Operates on RF (radio frequency) with a range of up 20M. It can also be with or without the Wi-Fi controller which also smart phone control.
The Wi-Fi controller can be used instead of this remote or you can use both controls to operate the same CCT LED strip. If you've got multiple types of LED lights in your home such as RGB, single colour or even ground lights, the Wi-Fi controller can control everything from a single App.
Dims and changes the colour temperature of the strip with an easy to use wheel. Also has speed settings and the ability to save and recall scenes.
Specification
- Voltage: battery powered (requires 3xAAA batteries)
- With 1-6 zones and 1-6 scenes
- Product code: SR-2819CCT
- Manufacturer: LED Strip Fit
No product reviews received for product Remote Control For CCT LED Tape (1-6 Zones) with product ID 40712.
- Length: 138mm
- Width: 48mm
- Depth: 17mm
Remote Control For CCT LED Tape (1-6 Zones)RRP: £36.38 Prices FromExcl. VAT: £30.92 Incl. VAT: £37.10 15% off RRP |
Aurora MPro 40 Degree Lens AccessoryRRP: £7.50 Prices FromExcl. VAT: £3.00 Incl. VAT: £3.60 60% off RRP |
Arbors A1 or A2 StarrettRRP: £8.47 Prices FromExcl. VAT: £5.08 Incl. VAT: £6.10 40% off RRP |
|
| Short Description |
Hand held remote control for use with colour temperature adjustable LED tape (known CCT LED Tape). This remote requires an additional RF receiver and is is cable of controlling 1 to 6 zones.
|
Replaceable lens accessory that allows you to easily swap the beam angle from the factory fitted 60 degree beam to a more narrow 40 degree beam.
|
Arbors for use with hole saws, manufactured by Starrett. With a screw located in the body that allows for easy replacement of the pilot drill. Available in A1 or A2 frame sizes. |
| SKU |
SR-2819CCT
|
AU-LNMPRO40
|
A*
|
| Manufacturer |
N/A
|
N/A
|
N/A
|
| Dimmable |
N/A
|
N/A
|
N/A
|
| Voltage |
N/A
|
N/A
|
N/A
|
| Beam Angle |
N/A
|
N/A
|
N/A
|
| Cap Type |
N/A
|
N/A
|
N/A
|
| Depth / Height |
N/A
|
N/A
|
N/A
|
| Cut Out Size (varies: check downlight dimensions) |
N/A
|
N/A
|
N/A
|
| Luminous Flux |
N/A
|
N/A
|
N/A
|
| Wattage |
N/A
|
N/A
|
N/A
|
| Fire Rated |
N/A
|
N/A
|
N/A
|
|
RRP: £36.38 Prices FromExcl. VAT: £30.92 Incl. VAT: £37.10 15% off RRP |
RRP: £7.50 Prices FromExcl. VAT: £3.00 Incl. VAT: £3.60 60% off RRP |
RRP: £8.47 Prices FromExcl. VAT: £5.08 Incl. VAT: £6.10 40% off RRP |