We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. View Cookie Policy.
Click Ovia GU10 downlights offer a low cost solution for your downlighting needs. They are non fire rated and supplied without lamps. GU10 lamps can be ordered separately which include low energy LED or halogen.
-
Features
Click Ovia GU10 downlights offer a low cost solution for your downlighting needs. They are non fire rated and supplied without lamps. GU10 lamps can be ordered separately which include low energy LED or halogen.
Available in three finishes of polished chrome satin chrome and white. They operate on mains voltage and don't require any additional transformers. We recommend the Click Ovia range of GU10 LEDs which are available in4 watt non dimmableor5.5 wattdimmableversions.
The compact design of just 80mm in height allows them to be installed into shallow ceiling voids. Usually GU10 downlights are much deeper at around 100mm.
The images shown are for illustration purposes only the downlights are not supplied with a halogen.
Key Features
- Material: Pressed steel
- Cap type: GZ10 / GU10CLICK HEREfor further information.
- Voltage: Mains voltage 230V
- Supplied without lamps. Can be used with perfect fit GU10 lamps. Not suitable for deeper lamps.
- IP ratings:Fixed and adjustable (gimbal) are IP20Bathroom versions are IP65 -Can be used directly above a shower. More information about Bathroom zones can be found byCLICKING HERE.
- Non fire rated downlights. Can be converted into fire rated by adding a fire hood or loft cap.
- With housed terminal block with loop out facility.
- IP65 version comes with a Click Flow connector
- Manufacturer: Click Scolmore / Click Ovia
- Guarantee: 3 Years
-
Specifications & Dimensions
Specifications Brand Ovia Lighting Cap Type GU10 Dimensions Located Below Specifications Table Dimmable LED Not Included Downlight Type SpecificationsRecessed downlights are available in different types such as fixed, adjustable and bathroom (IP65).
Fixed downlights shine the light directly downards. Adjustable downlights allow you to redirect the angle of light onto a specific object or area.
IP65 downlights are water resistant and suitable for use in bathroom zones 1 & 2. Most integrated LED downlights are IP65 rated as standard. This means they can be used anywhere including kitchens and living rooms etc.
Fixed GU10 downlights don't offer any resistance to water, their IP rating is usually IP20. They have no seal and cost less.
Finish Fire Rated No Insulation Coverable SpecificationsIn order to achieve Part L Compliance (energy efficiency) you shouldn't cut around thermal insulation. If you do this your home or building won't be energy efficient as valuable heat will escape through the hole of the downlight.
A downlight can act like a chimney and draw out warm, rising air from a room, up into the cold space above. The effect is increased in upper floors containing lofts.
Insulation coverable downlights allow you to place thermal insulation directly on top of them.More information about insulation coverable downlights.No Product Type GU10 Downlight Series Ovia Baylis Sku OVGZ0** Voltage 230V AC Warranty 3 Years Fixed
- Height: 80mm
- Diameter: 82mm
- Cut out size: 65mm
Adjustable
- Height: 80mm
- Diameter: 92mm
- Cut out size: 82mm
- Tilts by an angle of 30 degrees
IP65 Bathroom Version
- Height: 80mm
- Diameter: 86mm
- Cut out size: 72mm
-
Reviews
-
Q & A
Q & A
-
Downloads
-
Product Codes
Fixed Downlight
- GZ015CH - Polished Chrome:
- GZ015SC - Satin Chrome
- GZ015WH - White
Adjustable Downlight
- GZ020CH - Polished Chrome:
- GZ020SC - Satin Chrome
- GZ020WH - White
IP65 Downlight
- GZ096+GF495CH - Polished Chrome:
- GZ096+GF495SC - Satin Chrome
- GZ096+GF495WH - White
"